APN stands for Access Point Name; thus, Rain APN settings contain information needed to facilitate internet browsing on any device. Rain APN settings enable any device connected to the Rain network to browse the internet. But before you can swiftly make data connections through your device, you have to ensure that you have activated your Rain SIM card and equally purchased a data plan. That said, here are Rain’s APN settings for router, iPhone, and Android devices.<\/p>\n
Although Rain internet settings are usually retrieved automatically, there are a few occasions where the settings are not automatically configured. In such a situation, you must input the APN settings manually. However, you need to make sure that you configure on your device the correct APN settings specific to the Rain network for it to make internet connections. The default Rain APN settings are:<\/p>\n
Note:<\/strong> For default Rain internet settings, after inputting the Access Point Name as rain, all other settings can be left blank.<\/p>\n Rain, a South African data-only mobile network, primarily recommends Huawei routers. The recommended Huawei routers include Huawei CPE X – N5368, Huawei B2338, Huawei CPE Pro – H112, Huawei B618, and Huawei B315. In most cases, once you insert the Rain SIM card into any router (Huawei, Vodafone, Telkom, ZTE, etc.), the APN settings will be automatically configured. Still, if it fails, the Rain APN settings for routers by different manufacturers are given below:<\/p>\n The Rain APN settings for Huawei routers connected to the Rain network are:<\/p>\n Note:<\/strong> The APN settings are the same for Vodafone, Telkom, ZTE routers, or any other router by a different manufacturer.<\/p>\n It’s necessary to configure Rain APN settings on your Huawei router to make internet connections through the device. The steps involved include:<\/p>\n STEP 1:<\/strong> Connect your pc or phone to your Rain WiFi network.<\/p>\n STEP 2:<\/strong> Open a browser on the device and type http:\/\/192.168.8.1.<\/p>\n STEP 3:<\/strong> Click “Enter.”<\/p>\n STEP 4:<\/strong> Using the default username and password, log in to your Huawei router. In most cases, the username and password are the same – “admin.”<\/p>\n STEP 5:<\/strong> Click on “Settings.”<\/p>\n STEP 6:<\/strong> Click on “Dial-up” and next on “Profile Management.”<\/p>\n STEP 7:<\/strong> Add a new profile.<\/p>\n STEP 8:\u00a0<\/strong>Set profile name and the APN name as rain.<\/p>\n STEP 9:<\/strong> Save the profile.<\/p>\n STEP 10:<\/strong> You can now set up your personalized username and password.<\/p>\n STEP 11:<\/strong> Click “Finish,” log out and close the browser tab.<\/p>\n STEP 12:<\/strong> If the device fails to connect to the Rain network, restart it and log in with the new router WiFi username and password created.<\/p>\n Note:<\/strong> Though there may be slight differences in how each Huawei router gets set up, the configuration steps for the Rain APN settings are the same on all Huawei routers.<\/p>\nRain Internet Settings for Wi-Fi Devices<\/strong><\/h2>\n
Rain APN Settings for Huawei Router<\/strong><\/h3>\n
\n
Steps to Configuring Rain APN Settings on a Huawei Router<\/strong><\/h3>\n
\n